What to Check if Your Hot Water Service is Not Functioning

Free Estimates

Presented here below you'll find a lot of reliable guidance regarding What Would Cause My Electric Water Heater to Stop Working?.



Numerous modern-day homes utilize an electrical hot water heater for their heating system, because of its ease and simplicity of use. Nonetheless, just like any other electric devices, problems might emerge with its usage, all of a sudden. It can be actually frustrating to get up to a cool shower instead of a hot one or having your bath with water that isn't warm enough or even as well warm. Whatever the instance may be, water heater problems can be quite stressful. The good news is, we've made a list of possible options to your hot water heater issues. There are a number of aspects that could trigger much of these troubles, maybe a concern with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the problem is, getting it fixed should not present way too much of a concern if you comply with these actions:

Call A Specialist:


If after changing all faulty parts and resetting your temperature, the water heater still isn't working, you may need to contact an expert plumber for a professional opinion. The issue with your heating unit could be that the hot and cold taps have been switched or it might be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would help address the trouble.

Inspect Your Power Supply:


As fundamental as this may seem, it is really essential. Without appropriate power, your water heater will not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power trouble. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, simply transform it on and off again. Replace any broken or damaged fuse. Evaluate the device with power after these modifications to see if it's now functioning.

Inspect Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't warm sufficient, you might need to examine the temperature settings on your top thermostat. Guarantee the circuit breaker is switched off prior to doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This should assist heat the water. Turn the breaker back on and examine if the issue has been resolved.

Examine the Burner in the Water Heater:


If it's not a power trouble, after that try checking out your heating element if it is still functioning. Check each of your heating elements to make sure the trouble isn't with any of them. If any one of them is malfunctioning, replace that component and then examine whether the hot water is back on.

Verdict


Water heater problems are not constantly major. Much of them are due to small issues like a blown fuse or damaged heating element. Changing the faulty components should work. Nonetheless, if you are still not able to resolve the trouble, give a call to your closest plumber ahead to get it fixed.


Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



As a passionate person who reads on No Hot Water — Water Heater Repair, I assumed sharing that editorial was a good thing. Enjoyed reading our blog? Please share it. Help others find it. Thanks a lot for your time. Kindly check up our site back soon.




Visit

Leave a Reply

Your email address will not be published. Required fields are marked *